Knowledge Base

This is an automatic water and soap dispenser that uses simple components. The system used two water tanks one for the water and the other one for the liquid soap, both the two tanks connected to a single tap using T-Junction with non return valve. Each tank connected to water pump machine to supply it contents to the tap. The system also used Ultrasonic sensor for the detection of Hands at a specified distance.

Working Principle

When hand detected the soap tank supply the liquide soap and stop, you can

The research project aimed to demonstrate the design of advance energy prepaid meter with newly added features. We constructed the circuit using locally available components, both the current and voltage sensor section ware built and tested successfully for the measurement.

The meter measures the watt per hour and covert to killo watt per hour to monitor the consumption of the energy and automatically deduct from the recharged unit, when unit exusted supply terminated until the meter recharge again. The recharge could be via sms of manually enter by keypad,

This project presents a vehicle control system capable of learning to navigate autonomously. Our approach is based on image processing, road and navigable area identification, template matching classification for navigation control, and trajectory selection based on GPS way-points. The vehicle follows a trajectory defined by GPS points avoiding obstacles using a single monocular camera. The images obtained from the camera are classified into navigable and non-navigable regions of the environment using neural networks that control the steering and velocity of the vehicle.